Handling Flooded and Lodged Corn at Silage and Grain Harvest

Link to fact sheet with additional recommendations for flooded corn where water was over the ear

Rain events during August produced localized flooding affecting numerous corn fields. Recent high winds combined with saturated soils have resulted in lodged corn. All this is occurring at the dent growth stage (R5) as we head into corn silage harvest season. Heavy silage harvest equipment can further damage soils by causing compaction which could influence next year’s crop.

Joe Lauer, UW Extension Corn Specialist has put together the following information for harvesting the corn crop this fall.

Flooded corn
Flood water from streams and silt can be a source of pathogens. Farmers are strongly encouraged to work closely with their veterinarian and animal nutritionist when determining which vaccination and feeding protocol to use to further protect the herd from possible health issues associated with feeding flooded crop material. Flooded crops should be stored separately from the rest of your feed. In cases of production problems, this allows for feeding or disposal options without affecting your good feed.

Lodged corn
Fields that have lodged at denting (R5) might “goose-neck” back upright if they are still green. However, high yielding heavy ears may prevent the stalks from straightening at all. Fields should respond to any straightening within 7-10 days

Silage harvest
Some things to consider as we head into corn silage harvest season:

  1. Safety first.
  2. Water saturated soils will slow down plant dry-down rate, especially with cooler temperatures. Allowing a little more time for the field to dry out will help alleviate potential soil compaction.
  3. Regardless of lodging, the key management driver is plant moisture.Yield is no longer a concern. Target fields at the ideal moisture content of the storage structure. Bag silos have the greatest moisture range (60 to 70%) and may be best option when the field is variable.
  4. Good fermentation will help with preservation. Consider a silage inoculant, however, balance the cost of the product with the loss expected in in the field. Don’t throw good money after bad.
  5. Use a Kemper head and go against the direction in which it leans.
  6. Reach down low. Run the head as close to the ground as possible. Be wary of rocks and uneven terrain.
  7. Make sure the kernel processor is adjusted correctly. Kernel processing allows for grain that might be more mature extending the harvest window and allowing the soil to dry more avoiding compaction.

Grain harvest
Identify fields that are at greatest risk and harvest these fields first. Fields which experienced late season stress or disease would be prime candidates for early harvest.

  1. Safety first
  2. Reduce ground speed. Slow down and adjust gathering chain and snapping roll speed to match combine speed
  3. Go against the grain. Combine corn the opposite direction from which it leans.
  4. Catch the corn. Adjust gathering chains and snapping plate as close as possible to the stalks.
  5. Reach down low. Run the head as close to the ground as possible. Be wary of rocks and uneven terrain.
  6. Be ready. Scout fields to anticipate harvest problems.

 

Sharing is Caring - Click Below to Share